European-type Hammer Crusher,Hammer Crusher,hammer crusher introduction.

European Type Hammer Crusher

European-type Hammer Crusher is widely used in mining, building materials, chemical industry, metallurgy, cement, ceramic, refractory industry and so on. The European-type Hammer Crusher is suitable for secondary and fine crushing of all kinds of rocks with compressive strength less than 320 MPa.

The European-type Hammer Crusher is of high capacity, high crushing ratio, simple structure, uniform output granularity as well as low electricity consumption, and is easy to maintain and operate. The moisture of the raw material should be less than 10% - 15% to avoid the blocking of material during the crushing process.

The European Type Hammer Crusher mainly includes case, rotor, iron bearing, grate bars and other components. There are two parts in case: the upper one and lower one which are welded after cutting. The remaining parts are connected by bolts. Inside the case, there is high manganese steel liner which can be replaced after wear and bear. The European Type Hammer Crusher is installed on an array of spindles which forms the rotor together with rotary table and axis. The rotor rotates through motor and V-belt driven spindle. The hammer streths around as the centrifugal force generated by rotation, in that way, bulk materials feed into the crushing chamber and are crushed by the high-speed movement. The standard stones pass from the grate bars below and for those not standard will again be crushed in the case till they can pass from the grate.

Model	PC4008-75	PC4012-90	PC4015-132
Rotor diameter / mm	750	900	1150
Rotor length / mm	800	1200	1500
Rotor speed r / min	800-1000	800-1000	550-800
Inlet Size /mm	320×930	400×1200	500×1500
Max feed size / mm	<50	<50	<100
The particle size / mm	0-3	0-3	0-8
Capacity t / h	10-30	30-60	60-100
Motor Power/Kw	55-75	75-90	110-132
Hammerhead Quantity/a	18	32	32
Dimension LWH/mm	231016651610	284021002020	372026502540